Hyundai IC210X-20 Engine – Genpower

Hyundai Engine IC210X-20

The IC210X-20 is a powerful 212cc petrol engine from Hyundai, ideal for a range of heavy-duty applications for use in construction equipment, industrial equipment, tillers, welders, water pumps, pressure washers and more.

A direct replacement for any 6.5 / 7hp engines, the IC210X-20 is suitable for the majority of pressure washers up to approximately 2500psi, water pumps with up to an 80mm outlet and more.

With no messy oil and fuel to mix, 4-stroke engines have lower noise and vibration levels compared to their 2-stroke counterparts.

Thanks to its easy recoil pull-starting system, this engine is so simple to get going, minimising any undue stress or strain to your hands, arms and shoulders.

Featuring CDI ignition - a simple yet reliable starting system used in the majority of smaller engines - it ensures that the engine will start and run smoothly without any interruptions.

Ideal for fitting to any machines that require 7hp and have a 20mm shaft, this engine is incredibly versatile for both commercial and home use.

This powerful engine features a low oil level cut-out, which stops the engine when the oil level drops too low to protect the bearings from any detrimental damage.

Here are the points covered in the above video :

0.00 - 0.30 - Introduction
0.30 - 0.49 - Content of the box
0.50 - 1.51 - Engine Description
1.52 - 2.10 - Air Filter
2.16 - 2.25 - Exhaust and Valve Clearances
2.26 -2.32 - Spark Plug
2.33- 2.44 - Turning the Engine on & off
2.45 - 2.50 - Output Shaft
2.51 -3.05 - Engine footprint
3.06- 3.21 - Summary of the Engine

Please feel free to explore the Hyundai Power Equipment and the Powersite website for more helpful hints and tips.

Should you require any further assistance, our dedicated aftersales team can be reached on 01646 687880

IC210X-20 -Manual.pdf
5 MB Download

Related articles