WONT START
Check that the oil level is correct
Check fuel level if not new
Check if there is a spark at the spark plug
If its been stored over a month replenish the fuel and drain/clean the carburettor
NOT CUTTING EFFICIENTLY
Check the cutting blade(s) for adjustment and condition.
Check the carrier bearings for conformity.
PRODUCT JAMMED
NOTE - Always take the spark plug cap off, when carrying out any cutting blade operations.
Remove the large feeder and remove product
Check the user manual for manually turning the cutting blade
Make sure the discharged product is cleared as required
Carry out regular checks for component security, general maintenance.
Comments
0 comments
Please sign in to leave a comment.