Installing your HY3100P, HY3150S, and HY3200S to the mains electricity requires careful consideration and professional assistance. To ensure a safe and successful connection, please follow the steps outlined below:
The HY3100P, HY3150S and HY3200S compressors have a 2.2kw/2200w/3hp single phase, 230v 50hz electric motor. They are supplied with a 13amp 3-pin plug and it will be fine for normal DIY use.
However, if the air compressor is being used for more than a 50% duty cycle (motor running for more than half the time) it may be advisable to use a blue 16 amp plug.
The compressor should always be plugged directly into the wall socket. If extension leads are used, a voltage drop may occur and this will increase the amperage which may cause the 13amp fuse to overload and blow.
This may also be a problem in outlying rural areas where the mains voltage is below 230v, in which case a 16amp blue plug is recommended.
If you require further assistance please contact us at aftersales@genpower.co.uk
For information on our other products and power tools, visit: hyundaipowerequipment.co.uk
⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺
Comments
0 comments
Article is closed for comments.