How to Change the Gearbox and Rear Axle on the Hyundai HYM510SP/HYM510SPE Petrol Lawnmower

Are you having difficulties changing the Gearbox and Rear Axle on your Hyundai HYM510SP/HYM510SPE Petrol Lawnmower?

The below video will guide you to change the Gearbox and Rear Axle without any difficulties.

While not all of the steps may apply to your model, it is important to follow them in order to get the best results.



In this video, you will see the following:

00:00: Introduction.
02:00: Removing the Rear Wheels.
04:54: Removing the Link Bar.
05:45: Removing the I-Shaped Bracket.
06:32: Removing the Bracket

07:05: Removing the Rear Axle and Gearbox.
10:00: Removing the Clutch Cable or the Drive Engagement cable.

12:30: Fitting the Bearings.

13:10: Fitting the Gearbox and Axle

16:32: Reconnecting the drive cable.

17:40: Fitting the Bracket.
19:50: Fitting the Wheels.
23:20: Starting Procedure. 

If you require further assistance please contact us at [e-mail]

For information on our other products and power tools, visit: hyundaipowerequipment.co.uk

⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺