How to Start a Petrol 2-Stroke Brush cutter Multitool or Grass Trimmer

Are you having an issue starting your Petrol 2-Stroke brush cutter Multitool or Grass trimmer?

Here are the easy steps to help you in starting the unit:

1. Fill the tank with a pre-mix of fresh unleaded petrol and semi-synthetic 2-stroke oil.
2. Switch the engine ON/OFF switch to ON.
3. Pump the primer bulb 6 times.
4. Move the choke to the ON/START/CLOSE position.
5. Pull start until the engine fires or tries to start. Move the choke to the OFF/RUN/OPEN position.
6. Pull start until the engine starts.
7. Let the engine warm up before using full throttle.

Please find below a video that can help you to pursue the above steps:




Machines with a soft easy start recoil do not need to be pulled very fast. The spring-loaded recoil will spin the engine at a higher speed as it releases.