Hyundai HYM530SPE Petrol Lawn Mower | Troubleshooting and Manual

Download our most recent manual attached if you've misplaced the one for the Hyundai HYM530SPE Petrol Lawn Mower.

Are you having an issue with starting your Hyundai HYM530SPE Petrol Lawn Mower?

Here are the easy steps to help you in starting the Hyundai HYM530SPE Petrol Lawn Mower.

Troubleshooting

HYM530SPE engine does not start

• Ensure that the OPC cable is adjusted correctly
• Check the fuel level in the fuel tank.
• Check whether the fuel has gone stale. We have a guide for draining stale fuel here.
• Check whether the air filter element is dirty. If so, you may have to buy a replacement.
• Check whether the spark plug is loose or disconnected.
• The engine may be flooded - wait several minutes before attempting to start it again.

HYM530SPE spark plug issues

• Is the spark plug cap incorrect? It should be set to 0.7-0.8mm or replaced.
• The carburettor may be flooded with fuel. If this is the case, remove the air filter and pull-starter rope until carburettor clears.
• You may have a faulty ignition module - contact us for repairs if this is the case.

HYM530SPE difficult to start or loses power

• There may be dirt, water or stale fuel in the tank. Drain the fuel and clean the tank - see our video here. 
• Check to see if the vent hole in the fuel tank is clogged - if so, clean or replace the fuel tank cap.
• Check whether the air filter element is dirty. If so, you may have to buy a replacement.

HYM530SPE engine operates erratically 

• Check whether the air filter element is dirty. If so, you may have to buy a replacement.
• Is the spark plug cap incorrect or defective? It should be set to 0.7-0.8mm or replaced.

HYM530SPE engine skips at high speed

• Is the spark plug cap incorrect or defective? It should be set to 0.7-0.8mm or replaced.

HYM530SPE engine overheating

• The cooling airflow may be restricted. Remove any debris from slots in the shroud, blower housing and air passages.
• Is the spark plug cap incorrect or defective? It should be set to 0.7-0.8mm or replaced.

HYM530SPE mower vibrates abnormally

• The cutting assembly may be loose - if this is the case, tighten the blade.
• The blade or cutting assembly may be unbalanced - if this is the case, contact us for repairs.
  
  

If you require further assistance please contact us at [e-mail]

For information on our other products and power tools, visit: hyundaipowerequipment.co.uk

⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺⸺