Diagnosing Faults and Error Codes on Space Heaters

Are you having faults and error codes with your Hyundai Space heaters?

Do not worry, we have the best advice and remedies for your Hyundai Space Heaters in the below video:

While not all of the steps may apply to your model, it is important to follow them in order to get the best results.


In the video you will see:

00:00: Introduction of the code E1.
00:23: Possible Errors.

00:55: Remedy for Motor Failure.
01:10: Checking the Motor Connectors.
01:21: Causes and Remedy of Control Board Failure.
01:31: Low Voltage.
01:52: Causes and Remedies for why there is no heat.
02:45: Checking for the Pump Pressure.
03:06: Igniter not functioning Properly.

04:25: Introduction of the Code E2.
04:49: Introduction of the Code E3.

05:15: Accessing Faulty Components.

05:45: List of Parts in the Space Heater.
07:15: Replacing the igniter.
08:55: Replacing the Temperature Sensor.
09:30: Setting the Thermostatic Control
10:07: Removing the Control Panel.
10:52: Wiring of the Control Circuit Board.
13:20: Reassembling the unit.
13:50: Pressure of the Pump
14:17: Adjusting the Pump Pressure.
15:03: Outro

If you require further assistance please get in touch with us at [e-mail]

For information on our other products and power tools, visit:hyundaipowerequipment.co.uk

________________________________________________________________________________________________________________