WARNING
ALWAYS unplug the mixer and make sure it has come to a complete stop before
carrying out any maintenance.
Maintenance to be carried out by certified personnel only.
Thoroughly clean the mixer at the end of each day’s operation.
The slightest trace of material left in the drum will harden and attract more each time
you use it.
Dried cement should be scraped out of the drum.
DO NOT throw bricks into the mixer drum to clean it out.
DO NOT beat on the drum with a shovel, hammer or any other tool.
The drum may be scoured for approximately 2 minutes using a mixture of 1” gravel and
water.
The drive belt is under constant tension by a spring loaded jockey pulley.
No adjustment is required apart from a touch of grease on the spindle.
The bearings are sealed for life.
If you need any spare parts for your HYCM160 , please take a look at our page https://power-spares.co.uk/
For further assistance call our after-sales team on 01646 687880.
For more information, helpful hints, and tips visit the Hyundai Power Equipment website hyundaipowerequipment.co.uk
Comments
0 comments
Article is closed for comments.