Resetting Maintenance Intervals on CoMap AMF9 Controller

To reset the hour timer on the display unit you will need to make sure the machine has been
serviced by following the instructions manual or guidance from our technical aftersales team
When you are ready to do the reset you will need to press the 3 lines so this brings the main
menu up

When the main menu has come up please press enter on login and then enter again

The logins will be USER 0001 PIN 0000 then press enter again and this will take you back to
the login screen

Now you have logged into the system you will need to press the 3 lines go back to the menu list
and down to the maintenance timers and press enter

When you are in the maintenance timers you will need to change the timer 1 run hours to 250
HOURS

You do this by pressing and holding the enter button until the new valve comes up and then
changing the number to 250 pressing enter will lock the new value

and then press the 3 lines until you get back to the main page and then press the fault reset on
the photo below and turn the machine off and back on and this will reset the system