Poonam Shanto

      Troubleshooting Heater fires, but main PCB shuts heater off after a short period of time, flame is flickering, and LED display show “E1” (1 flash).     Heater will not operate or motor r...

    Troubleshooting Heater fires, but main PCB shuts heater off after a short period of time, flame is flickering, and LED display show “E1” (1 flash).   Heater will not operate or motor runs ...

  On and Off Press the on/off trigger to start the tool. The tool has a lock button(5) for constant use. /Off Trigger (4 On/Off Trigger (4 On/Off Trigger ( Constant Speed Activating the lock fe...

        Maintenance - Operations to be carried out after the first 60 hours of use. Check that all nuts and bolts are tight, particularly those retaining the crank case andcylinder head. Replac...

  Input Voltage 230-240V~, 50Hz Power 1700W Hammer Impact Rate - 0-1900bpm Chuck 30mm - Hex The vibration emission value of the power tool is tested under EN 60745-1and EN 60745-2-6, and can va...

        Pre-Operation Checks Oil Level - 10w-30 / SAE 15w40 - 600ml Air Filter Inspection Check Fuel Level - Fuel Capacity (L) 15 Electrical Unloading Machine Grounding   Operation  Starting...

    Troubleshooting            If you need any help, please send us an email to aftersales@genpower.co.uk or call us on 01646687880

    A – Fuel TankB – Fuel Tank CapC – Control Panel (May appear different on your machine)D – AC Outputs – These provide 115V & 230V outputsE – Machines Wheels – Used to transport the machine.F –...

  The JCB CH150120PE is a heavy-duty, electric start, 15Hp / 457cc 4-stroke petrol Wood Chipper. It can cut wood up to 120 mm / 4.72 inches in diameter.     If you need any help, please contact us...

    Oil type - SAE15W40 -1100ml The machine is shipped without oil and it must be added before use.     Fuel Capacity - 25L - Petrol Check fuel lines, tank, cap and fittings frequently for crac...