JCB-SH70D - Troubleshooting

Troubleshooting

• Heater fires, but main PCB shuts heater off after a short period of time, flame is flickering, and LED flashes to advise the error code, 1 flash = “E1”.

• Heater will not operate or motor runs for short time, lamp flickers and LED flashes to advise the error code, 1 flash = “E1”.

• Fan does not operate when heater is plugged in and power switch is in the “ON” position. The lamp is flickering or on and LED flashes to advise the error code, 1 flash = “E1” or 2 flashes = “E2”.

• Lamp is flickering, and LED flashes to advise the error code, 3 flashes = “E3”

• Heater does not turn on and the lamp is not lit. 

Our friendly aftersales team will be more than happy to help you. Call our team on 01646 687 880 or send us an email to [e-mail].